The Pulsar Challenger Gen2+ has superior optical quality to those in the Gen2 bracket. Its built in IR illumation is useful for obervation at insufficient levels of natural illumination on further distances. This energy conserving wide angled IR illuminator is designed to use the device on a head mount in low light.
This Challenger Gen2+ models is equipped with five-lens eyepiece which provides users with edge-to-edge clearness by minimising distortion across the edges of the field of view and increases image sharpness and contrast.
Rubber eyecup helps the users to stay unnoticed as it conceals the light emission from the tube.
Made with fiberglss reinforced plastic, this monocular is more than tough enough to withstand impact, moisture and dust.
Operations are carried on with one single switch
Two diametrically positioned mounting rails with a ¼” tripod mount. Additional Weaver rail on the body is designed to install extra Pulsar IR Illuminator or other accessories.
Black spots can be visible in the field of view of the NV monocular 74093B (Challenger G2+ 3.5x56B), which is compliant with the technical requirements of the tube EPM223G-11-26V and is not a defect.
|Field of view||40 degree|
|Field of view (m@100m)||73m|
|Min. focusing distance||1.5m|
|Diopter adjustment||+- 6 diopter|
|Resolution||not less than 40 lines per mm|
|Equivalent IR power||30mw|
|Range of detection||200m (object 1.7 m high, illumination level 0.05 lux ("1/4 moon")|
|Power supply||3v (CR123 battery)|
|Tripod mount||1/4 inch|
|Level of protection||IP65|