Get 10% Off Selected Accessories Instantly - Use Code TREAT10

More Views

pulsar.jpg

Pulsar Quantum HSQ19 Thermal Imaging Camera

SKU: PUS-YU77309

Be the first to review this product

The Pulsar Quantum HSQ19 Thermal Imaging Camera is a lightweight, compact and feature packed thermal device designed for use in extreme weather conditions. With silent calibration controls and a quick start-up time makes for intuitive operation while the video output jacks allow easy connection to external monitors. Features White hot and Black hot viewing modes. 

Dispatch in 1-3 Days

$4,099.00

Shipping Calculator

The Pulsar Quantum HSQ19 Thermal Imaging Camera is designed for detection and observation during both daylight and nighttime hours, and under conditions where other optical devices such as binoculars, spotting scopes and night vision devices are inefficient. It will also perform exceptionally well in poor weather conditions such as fog and smoke, can handle obstacles like grass or bushes. At the core of the Pulsar Quantum HSQ19 Thermal Imaging Camera is the unique combination of high 160 x 120 resolution microbolometer sensor, germanium lens F19/0.7 and frostproof OLED 640 x 480 display.

Activation and operation of the Pulsar Quantum HSQ19 Thermal Imaging Camera such as running time set-up, choice of video output signal, brightness and contrast adjustment can be performed with the help of the encoder wheel. The Quantum series are equipped with a jack allowing external power supplies to be attached. The thermal imagers also have a video output to conduct video recording to external devices during observation. Pulsar Quantum HSQ19 Thermal Imaging Camera features quick start-up time taking less than 10 seconds between the push of the ON button and readiness to begin operation. The image is stable without distortion across the whole field of view and without “tunnel effect”. Quantum thermal imagers can be used within a wide temperature range from -20 °С to +50 °С. 

Features:

  • External power supply - Operation time of the unit can be significantly increased thanks to the use of external power supplies that can be connected with a special jack. When used in frosty weather, the power supply can be stored under the clothes 
  • Quick start-up time - Features short start-up time (5 - 7 seconds) from the push of a button to full operational status 
  • Carbon-filled plastic body - Designed to effectively withstand impact, moisture and dust which allows use in extreme conditions. The rubber armouring ensures secure grip of the unit
  • Wide range of operating temperatures - Effective for the use in low temperatures (-20°C) thanks to the frost-resistant OLED display employed in the unit. The image remains the same as when viewing at positive environment temperatures 
  • Silent microbolometer calibration - In the event that image quality deteriorates (lower contrast, overexposure in the field of view), the user can calibrate the microbolometer. This operation is absolutely noiseless
  • Brightness and contrast control - The control wheel located next to the lens allows the user to setup brightness and contrast most appropriate for each specific situation
  • Self-contained power supply - Powered with four AA size (rechargeable) batteries. The batteries are stored in a container which is inserted in the battery compartment of the unit
  • Video output - All Quantum models are equipped with an analogue video output to enable connection of external recording equipment or transmitting the image to the display
  • Lightweight and compact size 
  • Viewing modes - Two viewing modes “White hot” and “Black hot”


Specifications:

  • Detector Type: UL 02 15 2 Uncooled microbolometer
  • Refresh Rate: 30 Hz
  • Magnification: 2.5x
  • Digital Zoom: n/a
  • Resolution, pixels: 160x120
  • OLED Display size: 0.13"
  • Close-up Range: 2m
  • Exit pupil: 8mm
  • Spectral Range: 8.3-13.6µ 
  • Field of view Horizontal: 12°
  • Field of view Vertical: 9°
  • Diopter Adjustment: +5/-5
  • Max Detection Range: 450m
  • Startup Time (Approx.): 10 sec
  • Power Supply: 4÷6 V
  • Battery Type: 4xAA
  • External Power Supply: 8,4-15 V
  • Operating time on battery pack EPS3 / EPS5: 9/20
  • Operating time on a battery set approx: At least two hours
  • Degree of Protection, IP code (IEC60529): IPX4
  • Video Output: PAL/NTSC
  • Operating Tempertature: from -20°C, humidity up to 90%
  • Dimensions: 177x86x58mm
  • Weight (without/with batteries): 400g/490g

 

Product Code: PUS-YU77309

Additional Information

Additional Information

Magnification 2x
Apeture No
Viewing Range 450m
Battery Type 4xAA
Water Resistance No
Technology No
Resolution Lines No
IR Illumination Range No
IR Illuminator No
Head Gear Adaptable No
Tube Type No
Angular Field of View 12°(Horizontal x 9° (Vertical)
Binoculars Weight 400g (w/o batteries), 460g (w/)
Dimensions (L x W x H) 177mm x 86mm x 58mm

Reviews