On Sale Starizona RASA 8 Filter Slider for Select ZWO Cooled Cameras
Starizona RASA 8 Filter Slider for Select ZWO Cooled Cameras
This filter slider is only compatible with certain cameras on the RASA 8, check if your camera is listed!
Shipping Calculator
Starizona RASA 8 Filter Slider for Select ZWO Cooled Cameras
The filter drawers can be pulled in and out using a small knob, as the filter slider sits flush with your camera, leaving no room to grab the drawers. Extra Filter Drawers can be purchased separately.
Note: This Filter System is compatible only with specific cameras on the RASA 8.
- ZWO ASI1600MM Pro
- ZWO ASI1600MC Pro
- ZWO ASI294MC Pro
- ZWO ASI294MM Pro
- ZWO ASI533MC Pro
- ZWO ASI533MM Pro
- ZWO ASI183MM Pro
- ZWO ASI183MC Pro
- ZWO ASI585MC Pro
Usage on Rasa 8
The optical window in the RASA 8 will stay in place. The Filter Slider accounts for the extra optical path length of the filter glass.
Note that the Filter Slider can be installed upside down since the threads are the same on both sides, but it will only work in one orientation. You can determine the top by checking if the Starizona logo is right side up. The drawer itself goes all the way up to the top but does not extend all the way down, allowing it to come out without hitting the RASA retaining ring. If the drawer hits this ring, the Slider is likely upside down.
To attach the Filter Slider:
1. Remove the black 11mm female M42-threaded ring from the front of the ZWO camera.
2. Screw the red male M42 threads on the camera into the female threads on the top of the Filter Slider.
Specifications
|
Diameter |
3.10" (78.8mm) |
|
Thickness: |
0.76" (19.5mm) |
|
Telescope Side Threads: |
M42 Female Threads |
|
Camera Side Threads |
M42 Female Threads |
|
Filter Size: |
Standard 2" |
|
Weight: |
140g (5oz.) |